Zoom
Wrist Support with Gyroid Infill
サポーター：手関節ジャイロイド
Note
- We recommend using this item after consulting an occupational therapist or other disability specialist.
- Category
- Supports & Splints
- Designer
- SONOKO
- Size
- 115 x 180 x 3.5
- Print time
- 1h35m (2.8mm厚)
- Material
- TRF
- License
- Creative Commons - Public Domain Dedication
- Downloads
- 81
About this item
A support (supporter) made with TRF+H, a temperature-sensitive filament whose shape can be changed by heating it to 45°C or higher after 3D printing. It can be made with an optimal fit that matches the client's condition.
Printing tips
The images use Unitika TRF+H. The 3D printer has a 0.4mm nozzle. In the slicer, set Top shell layers=0, Bottom shell layers=0, Infill density=28%, Infill pattern=Gyroid, then after printing, warm it to above 45 degrees once before fitting. For about a week, the shape can be changed by repeated heating. The model is 3.5mm thick; if this is hard to handle, adjust it by making it thinner, for example by changing only the Z axis in the slicer's scale settings.